Questions about choosing, using, or caring for a Universal Feeder? Select a question below to expand the answer.
Yes. Universal Feeders have been used on cattle stations in Australia’s Kimberley region, where equipment faces demanding and remote conditions. Choose the model and livestock access configuration suited to your operation.
The steel sheets are zinc-coated, and the bases are hot-dip galvanized for durability and corrosion resistance.
The manufacturer states that Universal Feeders are designed to be lifted with grain inside. Before moving a loaded feeder, confirm the lifting method for your model and the total loaded weight. Use suitable equipment within its rated capacity and follow the manufacturer’s handling instructions. Contact RamQuip if you need help finding the instructions for your feeder.
Feeders can be relocated with a tractor or other suitable lifting equipment. An optional trailer and dolly configuration can make moving between paddocks and feeding areas easier. Ask RamQuip about compatible mobility options for your model.
The manufacturer describes slow-speed skid towing for empty feeders. Trailer and dolly options are available for moving feeders over longer distances. Confirm the approved towing setup, load limits, and speed for your particular model before moving it.
Universal Feeders combine zinc-coated steel sheets, hot-dip galvanized bases, and internal supports. The Ultimate Series also uses a one-adjuster design that removes the lower adjuster from the area where saliva, rain, and dirt can collect.
Universal Feeders are designed for outdoor use, with a sloped roof, water-deflection lip, and drainage holes to help keep feed dry. Check feed and the feeding area regularly, especially after wind-driven rain or during humid weather. Remove wet or spoiled feed and clear any buildup that restricts feed flow.
Universal Feeders can be used for sheep, lambs, goats, kids, cattle, and calves. Match the feeder model, access opening, and any creep-gate attachments to the animals you are feeding.
Corrosion-resistant materials and accessible surfaces make routine cleaning and maintenance straightforward. Check for wet feed, caking, and blocked feed outlets.
Use the supplied scraper tool, stored in a small hole on the top side of the adjuster cover, to scrape out the lick groove when needed.
When the feeder is not in use or is being put into storage, make sure the trough and lick area are cleaned thoroughly. Doing so will extend the life of your feeder.
The manufacturer lists grains such as corn, wheat, barley, and oats; pellets including soy hull and alfalfa pellets, protein pellets, and complete ration pellets. Legumes such as beans and peas are also compatible.
Different feed sizes and textures flow differently. Adjust the feeder when you change feed, and check consumption rather than assuming the same setting will produce the same intake. For a particular feed product or mix, confirm compatibility by checking with a RamQuip representative or your local dealer before use.
Use the following head-count guidelines when choosing a feeder. Actual requirements depend on animal size, feeding space, feed, and the feeding program.
Animals receive additional nutrition from pasture or other feed sources.
| Livestock | 6600 | 4000 | 2000 | 800 | 5 Ton Bull Buffet |
|---|---|---|---|---|---|
| Cattle | 35 | 35 | 17 | 11 | 40 |
| Sheep | 180 | 180 | 90 | 60 | Not applicable |
| Goats | 180 | 180 | 90 | 60 | Not applicable |
This is a feedlot-style program where the animals depend on the feeder for all their nutrition.
| Livestock | 6600 | 4000 | 2000 | 800 | 5 Ton Bull Buffet |
|---|---|---|---|---|---|
| Cattle | 35 | 35 | 17 | 11 | 35 |
| Sheep | 150 | 150 | 75 | 50 | Not applicable |
| Goats | 150 | 150 | 75 | 50 | Not applicable |
The 5 Ton Bull Buffet is for cattle only. These are feeder-access guidelines, not a complete ration recommendation. Discuss your livestock and feeding program with a RamQuip representative or your local dealer when choosing a feeder.
Capacity by weight changes with the type and density of feed. The manufacturer’s U.S. capacity and dimension figures are shown below.
| Specification | 6600 | 4000 | 2000 | 800 | 5 Ton Bull Buffet |
|---|---|---|---|---|---|
| Feed volume | 119.5 bu | 71 bu | 35.5 bu | 14.2 bu | Approx. 179 bu |
| Shelled corn | 6,692 lb | 3,976 lb | 1,988 lb | 795 lb | 10,000 lb |
| Barley | 5,736 lb | 3,408 lb | 1,704 lb | 682 lb | — |
| Oats | 3,824 lb | 2,272 lb | 1,136 lb | 454 lb | — |
| Length × width | 93 × 62 in | 93 × 62 in | 48 × 62 in | 32 × 62 in | — |
| Fill height | 76 in | 58 in | 58 in | 48 in | — |
Be aware that feed densities can vary depending on the commodity. Ask your local dealer or RamQuip representative if you have questions.
RamQuip is the U.S. and Canadian distributor for Universal Feeders. Use the dealer locator and select “Universal Feeder Dealers,” or contact RamQuip for help finding a dealer.
No. The Bull Buffet uses a traditional trough and a single slide to adjust feed flow. The Ultimate models use an adjustable saliva-lick feeding system.
Compare livestock suitability, feeding access, bin capacity, fill height and your expected feed use. Share your group size and feeding program with RamQuip for help comparing models.
Use the specification table rather than the model name. Listed weight capacities are based on shelled corn; other feeds can have different bulk densities.
Confirm suitability for the exact configuration. The 6600 Super Single is cattle only.
Answers adapted from Universal Feeders’ U.S. FAQs and manufacturer resources.